skip to Main Content

Stepless, flicker-free, expandable.

LED-compatible dimmers and KNX dimming actuators.

Similar to conventional Dimmer DIMAX 534 plus, the KNX universal dimmer from Theben also offers different presettings in order to make an optimum approach to the lamp connected. However, the KNX universal dimmer actuator goes one step further: in the programming software ETS, various dimming curves are stored, which correct the dimming response appropriately depending on the lamp used, thus ensuring infinite transitional dimming.

Here you will only find one product selection. Further products such as dimming switch, or similar, can be found at www.theben.de/en

Universal dimmer

DIMAX 534 plus

All DIMAX plus versions have presets for the optimum LED control.

  • Universal dimmer for R, L and C loads with automatic load recognition
  • 400 W dimming output
  • Adjustable minimum brightness (required for LEDS and ESL)
  • Use of the 1-channel dimming boosters 1 T KNX dimming booster can increase dimming output by 300 W/VA
  • Up to 3 light scenarios can be triggered over separate entries
  • Further information for DIMAX 534 plus
Universal dimmer DIMAX 534 plus

KNX MIX2 dimming actuator basic and extension module

DMG 2 T KNX und DME 2 T KNX

In the KNX programming software ETS, various dimming curves are stored, which correct the dimming response appropriately depending on the lamp used, thus ensuring stepless dimming. New dimming curves – e.g. for
future lamps – can be imported via ETS, thus ensuring your investments are well-protected.

  • 2-way universal dimming actuators MIX2, basic and extension module
  • For dimming dimmable LED lamps, low voltage and high voltage halogen lamps as well as incandescent lamps
  • Also suitable for dimming dimmable compact fluorescent lamps via different dimming curves
  • LED switching status indicator for each channel
  • Dimming output: 400 W/VA per channel or 1 x 800 W/VA in parallel operation
  • Use of the 1-channel dimming boosters 1 T KNX dimming booster can increase dimming output by 300 W/VA. Output of up to 2000 W/VA possible via max. 4 boosters
  • Automatic load detection (can be deactivated)
  • For R, L and C-loads
  • Dimming range 0–100 %
  • Further information for DMG 2 T KNX and DME 2 T KNX
KNX MIX2 dimming actuators DMG 2 T KNX and DME 2 T KNX

KNX FIX1 and FIX2 dimming actuators

DM 4-2 T KNX and DM 8-2 T KNX

Dimmable lamps, such as LEDs, halogen and energy-saving lamps, can be dimmed continuously with the new KNX universal dimmer actuators from Theben’s FIX1 and FIX2 range. In view of the increasing number of LED lamps with small wattages, multiple channels provide greater design freedom.

DM 4-2 T KNX_/ DM 8-2 T KNX
Back To Top