skip to Main Content

Fully automatic, versatile and adjustable device

LED compatible motion detectors from Theben.

Motion detectors from Theben are robust reliable stand-alone solutions that ensure for a safe and economical lighting. Thanks to zero-cross switching or tungsten pre-contact, this proven and tested technology can be designed with even more reliablility using LED lamps.

Here we show only a product selection. Further LED-compatible products are available on www.theben.de/en.

Motion detector

theLuxa S150/S180

All theLuxa S versions are equipped with a crossover switching to avoid wear and tear of relay contact and light source, i.e. prolongs service life of light source

  • Zero-cross switching
  • LED switching capacity: < 2 W: 25 W, 2-8 W: 90 W, > 8 W: 100 W
  • Detection angle 150°, Creep under protection
  • Detection area up to 12 m
  • Adjustable brightness switching value and time delay
  • Blended light measurement suitable for the control of LEDs, fluorescent, incandescent and halogen lamps
  • Teaching in of the current brightness switching value
  • Impulse, test function
  • Further information for theLuxa S150/ 180 motion detector

Motion detector

theLuxa P220/P300

All theLuxa P versions are equipped with a tungsten pre-contact that protects the switching relay and takes over the capacitive switching load.

  • Tungsten pre-contact
  • LED switching capacity: < 2 W: 60 W, 2-8 W: 180 W, > 8 W: 200 W
  • Max. switch-on peak. 800 A/ 200 µs
  • Detection angle 300°, Creep under protection
  • Detection area up to 16 m
  • For wall and ceiling installation
  • Blended light measurement suitable for the control of LEDs, fluorescent, incandescent and halogen lamps
  • Adjustable brightness switching value and time delay
  • Remote operation
  • Further information for theLuxa P300 motion detector

Motion detector

theMova P360-100 UP

All theMova P versions are equipped with a tungsten pre-contact that protects the switching relay and takes over the capacitive switching load.

  • Tungsten pre-contact
  • Switching capacity (only with 230 V): 2300 W, 1150 VA
  • LED switching capacity:< 2 W: 60 W/> 2 W: 180 W
  • Max. switch-on peak. 800 A/ 200 µs
  • Circular detection area 360°, up to Ø 24 m (452 m2)
  • Blended light measurement suitable for the control of LEDs, fluorescent, incandescent and halogen lamps
  • Operation as fully automatic device
  • Remote operation
  • Further information for theMova P motion detector
Back To Top